Sharp AF-R100EX Air Conditioner User Manual


 
14
HOW TO OPERATE
ON TIMER OPERATION
(If you wish to start the operation
6 hours and 30 minutes later, set
the delay time as shown above.)
1
Touch the TIMER ON/OFF pad to set the
delayed start time.
The time setting will change as you touch the
pad. The display will change as follows;
The timer will be set, 5 seconds after the
TIMER ON/OFF pad is touched for the last
time.
TIMER indicator will light.
Cool indicator will light when cooling
operation is selected.
The time display will count down the remain-
ing time.
The unit will start when the set time expires.
The temperature setting will be displayed.
This unit has a built-in timer that can be programmed to start the unit up to 12 hours in advance.
You can set the timer to start in increments of 30 minutes (0.5 hours) up to 9.5 hours in advance
of the start time, or in 1 hour increments from 10 to 12 hours in advance of the start time.
The unit will start automatically according to your setting.
When the unit is not operating
TO CANCEL THE TIMER SETTING
Touch the TIMER ON/OFF pad again after the
timer is set, or press the TIMER ON/OFF pad
until CL(cancel) appears on the display.