Filter
Top Products
OPERATING INSTRUCTIONS cont. OPERATING INSTRUCTIONS cont.
Concentrator Nozzle
To attach the concentrator nozzle to the
nozzle of the unit, align the "U" arrow on
the concentrator nozzle with the arrow
on the appliance. (See illustration.)
Push the attachment onto the nozzle
until it stops against the appliance body.
Turn in a clockwise direction
approximately 90°. The attachment is
now locked into position.
ATTACHMENTS
Window Squeegee Using the Steam Cleaner with
Floor Brush
Important: Please note that bristles may
break through thin towels. We recommend
that two (2) towels, laid one on top of the
other be used. This will ensure that the
brush bristles do not break through and
that the towels will be sufficiently absorbent
and retain as much dirt as possible.
Very Important: When installing the
towels to the floor brush, ensure that the
towels do not cover the front and the back
of the brush. (See fig. E)
Attaching a Towel to the
Floor Brush
100% white terry cloth towel can be fitted
on this brush, so as to absorb the dirt and
protect delicate surfaces.
Fig. B
3. Fold the towel as shown in Fig. B
1. Prepare white terry cloth towel:
size 8” x 17” as shown in Fig. A.
2. Place the brush on top of the towel.
Fig. A
4. Fold the other side of the towel as
shown in Fig. C.
Fig. C
CAUTION: When cleaning windows,
always avoid any sudden changes in
temperature to prevent glass breakage
or cracks.
Hand Grip
Locking
Button
Step 1: Connect one of the extension
tubes to the hand grip on the
flexible steam hose. To
attach the extension tubes
one onto the other or
onto the hand grip, press the
locking button ensuring that it
fits into the hole. (See
illustrations.) To disconnect,
repeat the operation by
pressing the locking button
and pulling the two sections
apart.
Please note that the window squeegee can
only be used with the
hose. To attach the
window squeegee to
the hose, push it in until
the squeegee locking
button clicks in place on
the hose.
Apply steam abundantly,
rub with the soft spongy end, then remove
excess water and dirt with the glass wiping
edge.
This attachment is very useful for cleaning
large windows, plastic material, ceramic,
tiled or marble surfaces.
Attaching the Hose
To attach the hose concentrator
nozzle (#12) to the hose, push it in
until the locking button on the hose
clicks in place with the hole on the
hose concentrator nozzle. See
illustration below.
To attach the hose to the nozzle of the
unit, align the "U" arrow on the
concentrator nozzle with the arrow on
the appliance. (See illustration.) Push
the hose onto the nozzle until it stops
against the appliance body. Turn in a
clockwise direction approximately 90°.
The hose is now locked into position.
Extension Tubes
Locking
Button
Angle Adapter
NOTE: Fit floor brush with
the angle adapter
on to the extension
tube.
This attachment can only be used with
either the unit concentrator nozzle or the
hose concentrator nozzle. To attach, push
the attachment onto the end of the
concentrator nozzle. (See below)
Angle Concentrator Attachment
Step 2: If the angle adapter is not
attached to the floor brush, hold
the brush with its bristles up in
your left hand. With the angle
adapter pointing downward, insert
it into the hole in the back of the
brush, then turn the angle
adapter 180°.
Step 3: Insert the electrical power cord
into the wall outlet. Heating time
is approximately 6 minutes with
cold water. Filling the steam
generator with hot water will
shorten heat up time.
The detail brushes can be used directly on
the hose concentrator nozzle which
attaches to the flexible hose or on the unit
concentrator nozzle. To attach, push the
detail brush onto the end of the
concentrator. (See below.)
Detail Brush
Locking
Button
6
7