Shark S3501CO Carpet Cleaner User Manual


 
8
TOLL FREE: 1-800-798-7398
9
www.sharkcompany.com
English
Care of Your Steam Mop
2 Remove the micro-fiber cleaning
pocket by releasing the quick
fasteners and using the lavender
loop on the side of the pocket,
avoiding contact with the hot pocket
or dirt. Then empty the water tank.
IMPORTANT: Be very careful
because the cleaning pockets can
get very hot from the steam, so use
caution when removing them. Let
the unit cool 2-3 minutes.
3 To store the Shark
®
Steam Mop
hanging up; first remove the head
(after it has cooled and the steam
has been released) then hang on a
large hook.
NOTE: If you want to store it
standing upright then make sure
it’s leaning against a wall for added
support and safety. Always store
your Steam Mop with the micro-fiber
pocket removed, away from children
or high traffic areas.
AFTER USE AND STORAGE
1 When you have finished using
the steam mop, and your floors
are clean, unplug the cord from
the outlet and move it into an
upright position. Let the unit cool
2-3 minutes and release steam by
pumping the handle several times
before removing the micro-fiber
cleaning pocket from the mop head.
1
2
3
Using Your Carpet Glider
THE CARPET GLIDER
1 The Carpet Glider can be used with
the Rectangle head to lightly steam
your carpet and area rugs. Just place
the mop head on top of the glider
and move back and forth across a
section of the carpet. The steam mop
won’t clean your carpeting or areas
rugs, but it’s great for deodorizing
and freshening.
NOTE: Please note that the Steam
Mop rests on top of the carpet glider
and it is not a fixed attachment.
Do not leave steam mop with carpet
glider in one stationary position for
any period of time.
1
The Steam Mop won’t clean
your carpeting or area
rugs. However, it’s great for
deodorizing and freshening.