Filter
Top Products
6
IMPORTANT: Your Steam Mop needs
water to make steam! Never use your
Steam Mop without water in the tank.
Sweep or vacuum your floors
before using your Steam Mop. Your
Steam Mop was designed to get
rid of stuck-on gunk, grime, paw/
footprints and it will do a better job
if yesterday’s cereal crumbs aren’t in
the way.
Using Your Steam Mop
1 Pull and twist the quick release
cord holder to unwrap the power
cord completely. Plug into a 220-
240 volt electrical outlet. The “On”
light will turn green. Success! If your
light doesn’t turn on reference the
Troubleshooting section on page 9.
Now comes the part you’ve been
waiting for – it’s time to use your steam
mop. When you use your steam mop for
the first time or haven’t used the unit
in awhile, it may take a minute or two
for the water to make its way through
the pump and into the heater to create
steam. Get it started by pumping the
handle a few times. If you’ve waited a
few minutes and you still don’t see any
steam, reference the troubleshooting
section on page 9.
1
HELP LINE: 0844 873 0728
S3101UKM_11_IB_ENG_120906_1.indd 6 12-09-06 3:27 PM