Shark NV360 Vacuum Cleaner User Manual


  Open as PDF
of 20
 
15
www.sharkclean.com
CHECKING FOR BLOCKAGES
Blockages may cause your vacuum to overheat and
shut down. To prevent this from happening, check
potential blockage areas after heavy use or if you
detect a loss of suction or poor cleaning performance.
1 Dust Cup
Dust cup may be full. Empty dust cup.
2 Pre-Motor & Post-Motor Filters
• Pre-motorltersrequirewashingevery3
months for optimum performance.
The post-motor HEPA filter needs to be washed
every 2 years.
• Ensurethatalltheltersareclean.
3 Accessories
• Checkintakeopenings:
- Extension Wand
- Dusting Brush
- Crevice Tool
- Pet Power Brush
- Appliance Wand
4 Hose and Connections to Vacuum
• Detachthestretchhosefromthebackofthe
portable Lift-Away
®
canister by squeezing
the tabs together and pulling up. (Fig. 28)
Straighten out the hose and look inside for
blockages.
• Removethedustcupandextensionwandand
separate the portable Lift-Away
®
canister
from the motorized floor brush. Look in all 4
openings for any blockages. (Fig. 29)
5 Motorized Floor Brush
(Side suction models)
• Detachthehoseonthemotorizedoorbrush
at the top by squeezing the tabs together and
pulling out, and at the bottom by pulling out
the connector. Inspect inside the 3 holes.
(Fig. 30)
Make sure you are working in a well
lit area and use a flashlight to help
search for blockages.
Fig. 30
Fig. 29
Fig. 28
NV360_26_IB_E_121119_1.indd 15 12-11-19 8:59 AM
 previous next