Filter
Top Products
12
STORE YOUR VACUUM SAFELY
1 Convert your vacuum back to upright vac mode.
2 Rotate the upper quick cord release to its upright
position and coil the power cord loosely around
the two clips. Clip the plug onto the cord to
secure. (Fig. 21)
3 Store the dusting brush and the crevice tool on the
mounts on the accessory holder.
4 Store your vacuum cleaner safely in a cool dry area
where it will not be a hazard, will not get damaged
and will not cause damage to anyone or anything.
NOTE: Empty dust cup after cleaning and prior
to storing. (See “Maintenance” section for
instructions.)
Storing
Quick
Cord
Release
Fig. 21
Lower
Cord
Storage
Wrap
Duster with Micro-
Fiber Pad
ASSEMBLING THE DUSTER
1 Press the handle release button to release the
handle with the extension wand from the vacuum.
2 Insert the extension tube (a) into the wand.
(Fig. 19)
3 Insert the duster (b). (Fig. 19)
4 Attach/remove the micro-fiber pad. (Fig. 20)
Fig. 19
Fig. 20
a
b
KEEPING YOUR MICRO-FIBER DUSTER PAD AS
GOOD AS NEW
1 We recommend washing your micro-fiber duster
pad separately from other fabrics to avoid picking
up lint.
Only use liquid detergent. (No powder detergent)
Don’t use any fabric softeners or bleach.
Line dry or dry on a low dryer setting.
NV350Q_26_IB_ENG_101019.indd 12 10-10-19 9:19 AM