Filter
Top Products
9
www.sharkclean.com
USING STEAM MODE
NOTE: You should vacuum your bare floors
before you steam them.
1 Twist the quick release cord holder to unwrap the
power cord completely and plug in the unit. The
LED lights on the steam nozzle will begin to flash
blue in a chasing manner. (Fig. 29)
2 To begin steaming, step gently on the foot pedal
once to enter DUST mode (1). The DUST light on
the until will appear solid blue. DUST setting is
a light steam for a quick dusting and fastest dry
time.
To switch to MOP mode (2), step on the foot
pedal a second time. The MOP mode light will
appear solid blue. MOP setting is for normal,
everyday steam cleaning.
To switch to SCRUB mode (3), step on the foot
pedal a third time. The SCRUB mode light will
appear solid blue. SCRUB setting is for heavy
cleaning.
3 After selecting the preferred mode, place your
foot lightly on the top of the steam nozzle
and tilt the handle back. Begin mopping in a
backward and forward motion. (Fig. 30)
To return to standby mode step on the pedal
again until the LED lights are flashing blue in a
chasing manner.
QUICK TIP: The steam mode (DUST, MOP,
SCRUB) can be switched while actively steaming
or while the unit is at rest.
IMPORTANT: Do not use the mop without
attaching a multi-purpose cleaning pad and
adding water to the tank first. When you are
using the steam nozzle head for the first time, it
might take longer than the 30 seconds to start
steaming. You will not notice any visible
steam until the steam mode is chosen
and the handle is tilted back.
NOTE: Check water level and fill anytime
throughout the cleaning process to maintain
optimal steam.
Fig. 29
Dust
Mop
Fig. 30
1
2
3
Scrub
Steam Mode
MV3010_40_ENG_IB_120703_1.indd 9 12-07-03 9:16 AM