Filter
Top Products
CORDLESS VACUUM
ASSEMBLY
Note: Dust cup filter (4) must be used when operating the hand vacuum.
Model EP750ST
14.4 V DC
1. To open the dust cup (container) (1), push button (2) and remove the dust cup (1).
Verify that the dust cup filter (4) is inside, then re-attach the dust cup (container) (1)
to the hand vacuum.
Fig. 1 Fig. 2 Fig. 3
2. To attach the convertible brush (8), crevice tool (11) or floor brush (9) to the Hand
Vacuum, push the attachment into the suction hole, as shown below.
3. To use the extension tubes (7) with the floor brush (9), push one of the extension tubes
into the suction hole, then insert the other extension tubes into each other and then
insert the floor brush (9) into the last extension tube. The convertible brush (8) and the
crevice tool (11) can also be used with the extension tubes (7).
3
8. Convertible Brush
9. Floor Brush
10. Charging Adapter
11. Crevice Tool
12. Recharging Stand
13. Charging Jack
1. Dust Cup (Container)
2. Dust Cup Release Button
3. On / Off Switch
4. Dust Cup Filter
5. Charging Light Indicator
6. Main Unit
7. Extension Tubes X 3 Pcs
NOTE: Cordless vacuum Model EP750ST is shipped with the
batteries uncharged. Charging of the unit for 16-20
hours prior to first use is required.
2