Filter
Top Products
GETTING TO KNOW YOUR BAGLESS CYCLONIC
UPRIGHT
PROBLEM SOLVING
This appliance was inspected thoroughly and was in good operating condition when it
was shipped from the factory. If a minor problem occurs, it usually can be solved quite
easily when the cause is found. Therefore, this checklist is provided for your
convenience.
PROBLEM POSSIBLE CAUSE POSSIBLE
Cleaner Won’t
Run
1. Not properly plugged into
wall outlet.
2. No electricity in wall outlet.
3. On/Off switch not turned
on.
4. Motor thermostat tripped.
5. Blown fuse/tripped
breaker.
1. Plug in firmly.
2. Check fuse or breaker.
3. Push on/off switch to on
4. Reset motor thermostat.
(page 9 )
5. Reset circuit breaker or
replace fuse.
Cleaner Won't
Pick Up
1. Full or clogged dust cup.
2. Wrong pile height setting.
3. Clogged nozzle or dust
inlet port.
4. Clogged hose.
5. Broken belt.
6. Hose not inserted fully.
7. Dirty filters.
8. HEPA filter needs
cleaning or replacing.
9. HEPA filter frame needs
cleaning.
1. Clean dust cup. (page 5)
2. Adjust setting. (page 5)
3. Remove obstruction.
4. Remove obstruction.
5. Replace belt. (page 8)
6. Push hose in securely.
7. Clean / change filters.
(page 7)
8. Clean or replace HEPA filter.
(page 6)
9. Clean HEPA filter frame.
(page 6)
Cleaner Picks
Up Moveable
Rugs Or
Pushes Too
Hard
1. Wrong pile height setting. 1. Adjust setting. (page 5)
Agitator Does
Not Turn
1. Broken belt.
2. Belt installed incorrectly.
1. Replace belt. (page 8)
2. Check belt changing and
agitator cleaning. (page 8)
Air Flow
Restricted
With
Attachment
Use Sound
Changes
1. Attachment use restricts
air flow.
2. New carpet debris
clogging air path.
1. Check attachment. (page 4)
2. Remove obstruction.
11. Quick Release Power Cord Holder
12. Extension Tubes (X2)
13. Crevice Tool
14. Upholstery Brush
15. Handle Release
16. Hose Connector
17. Furniture Guard
18. HEPA Filter Frame
19. Dust Cup (Not shown)
1. Upper Handle
2. On/Off Switch
3. Front Cover Release
4. Front Cover
5. Carpet Height Adjustment Knob
6. Head Light
7. Motorized Power Head
8. Main Body
9. Power Cord
10.Flexible Hose
Technical Specifications
Voltage: 120V., 60Hz.
Power: 12 Amps
Note: Illustrations may differ from actual unit.
3
10