Filter
Top Products
ENFORCER Outdoor Stand-Alone Keypad Quick Programming Guide
SECO-LARM U.S.A., Inc 3
2. Enter a user ID number.
Programming Output #1
*SK-2323-SPQ and SK-1323-SPQ only.
Each Output #1 user can be programmed to have a user code and a user card.*
1.3 User Card and Code*
7. Exit Programming Mode by pressing .
4. Swipe a new user card.
2. Enter a user ID number.
6. To program the next user, repeat from step 2 in section 1.1, 1.2, or 1.3.
5. Enter a new 5-digit user code.
1. Enter Programming Mode by entering the Master Code twice.
3. If the left LED is red, previous user data exists. Clear it by entering .
The keypad will beep in confirmation and the left LED will turn green.
2. Enter a user ID number.
1. Enter Programming Mode by entering the Master Code twice.
1.1 User Code Only
4. Enter a new 5-digit user code.
5. To program the next user, repeat from step 2 in section 1.1, 1.2, or 1.3.
6. Exit Programming Mode by pressing .
( to )
0
0
0
9
9
9
3. If the left LED is red, previous user data exists. Clear it by entering .
The keypad will beep in confirmation and the left LED will turn green.
7. Exit Programming Mode by pressing again.
5. Return to Programming Mode by pressing .
4. Swipe a new user card.
6. To program the next user, repeat from step 2 in section 1.1, 1.2, or 1.3.
1. Enter Programming Mode by entering the Master Code twice.
1.2 User Card Only*
3. If the left LED is red, previous user data exists. Clear it by entering .
The keypad will beep in confirmation and the left LED will turn green.
( to )
0
0
0
9
9
9
( to )
0
0
0
9
9
9