Filter
Top Products
TEL: 800-662-0800, 949-261-2999 / E-mail: info@seco-larm.com / Web www.seco-larm.com / Fax:949-261-7326
SD-969-A18
SD-969-S18
ENFORCER
®
Push-To-Exit Bar
MODEL: SD-961A-36
FEATURES:
• Designed to conduct power to electric locks or
access systems mounted in doors.
• 18” Stainless-steel cable.
• Mounting screws included.
•
Surface mount.
FEATURES:
•
Rugged, heavy-duty construction.
•
Pushing the bar at any point sends a signal to release the lock and/or sound an alarm.
•
For 36 inch doors (actual length is 34.5 inches). Can be cut to size.
•
Includes 2 built-in non-latching (momentary), normally open and normally closed
(N.O. and N.C.) contacts.
•
Two dual-contact switches (NO/COM/NC) — 5 Amps @ 125VAC.
•
Attractive brushed aluminum bar with black base and trim.
•
Includes SECO-LARM SD-969-A18 Armored Door Cord, and
mounting hardware (for mounting in wood or metal doors).
•
Designed for easy cutting in field to match width of non-
standard-sized doors.
•
Available by special order in the following additional sizes:
— For 42 inch doors (actual length is 40.5 inches).
— For 48 inch doors (actual length is 46.5 inches).
Armored Door Cords
MODEL: SD-969-S18
SD-969-A18
Designed to allow egress from inside
an area normally locked by an electric
lock or electromagnetic lock, and/or to
disarm (shunt) or trigger an alarm
when the door is opened.