Filter
Top Products
Page 5
1. Handle grip
2. On/Off switch
3. Handle assembly
4. Retaining ring
5. Cover release flap
6. Dust bag housing
7. Front cover
8. Housing release button
9. Power head with brush
10. Cable (cord)
11. Attachment tube handle
12. Attachment hose
13. Handle catch
14. Carrying handle
15. Cable (cord) hook
16. Attachment tube (active wand)
17. Crevice nozzle
18. Upholstery nozzle
19. Foot pedal
20. Swivel neck
21. Support lever
22. Projection tab
23. Connecting tube
Identification of Parts
Place the power head (9) on the floor with
the swivel neck (20) and the support lever
(21) upright. Hold the dust bag housing (6)
vertically and place it over the swivel neck
and support lever. Push firmly and evenly
down so that the housing release button (8)
snaps outward to its “locked” position.
Slide the dusting brush clamp (24) onto the
handle tube and tighten the screw. The han-
dle of the dusting brush (25) will now snap
into the clamp.
To lock the handle (3) to the dust bag hous-
ing (6), turn the handle catch (13) at the
handle joint of the filter bag housing (6) for-
ward to “open” position. Then slide the han-
dle assembly (3) in as far as possible and
lock it in by turning the handle catch to the
closed position.
Push the black end of the attachment hose
(12) into the connecting tube (23) so that it
clicks into place. Insert the attachment tube
(16) into the swivel neck and push the han-
dle (11) over the projection tab (22).
Insert crevice nozzle (17) and upholstery
nozzle (18) into the recesses in the back of
the machine.
Attach dusting
brush clamp
with screw
24
25
25
18
17
24
Optional Attachments
41. Wall and floor brush - Part # 1325 HG
42. Turbo brush for stairs - Part # 6179 AM
43. Radiator brush - Part # 1496 HG
44. Extension hose (9’3”) - Part # 1495 AM
45. Straight tube - Part # 1084 HG
46. Flat upholstery nozzle - Part # 1090 HG
Also available for odor control - the combined
micro/charcoal filter - Part # 5425 AM
45
Standard Attachments
17. Crevice nozzle
18. Upholstery nozzle
24. Dusting brush clamp
25. Dusting brush
Assembly
42
43
46
44
41
Note
All illustrations
shown in this manual
represent the X4
model except where
part numbers and
instructions are
different for each
model. In those
instances, illustra-
tions for both the X4
and X5 will be
shown.