Sears 9MPD100J14B1 Furnace User Manual


 
90 SingleStage
CategoryIVFurnace
N9MP1 & N9MP2
*9MPD *Denotes Brands (C, H, T)
FAN ASSISTED, DIRECT
VENT GAS FURNACE
SAFETY REQUIREMENTS
Recognize safety information. This is the safety- alert symbolZ.l_. When you see this symbol on the furnace and in instructions manuals be alert to
the potential for personal injury.
Understand the signal words DANGER, WARNING, or CAUTION. These words are used with the safety-alert symbol. DANGER identifies the
most serious hazards, those that will result in severe personal injury or death. WARNING signifies a hazard that could result in personal injury or
death. CAuT__Nis used t_ identify unsafe practices that c_u_d resu_t in min_r pers_na_ injury _r pr_duct and pr__erty damage.
Installing and servicing heating equipment can be hazardous due to gas and electrical components. Only trained and qualified personnel should
install, repair, or service heating equipment.
Untrained service personnel can perform basic maintenance functions such as cleaning and replacing air filters. All other operations must be
performed by trained service personnel. When working on heating equipment, observe precautions in the literature, on tags, and on labels attached
to or shipped with the unit and other safety precautions that may apply.
Follow all safety codes. In the United States, follow all safety codes including the current edition National Fuel Gas Code (NFGC) ANSI
Z223.1-2002/NFPA No. 54-2002. In Canada, refer tothecurrent edition of the National Standard of Canada Natural Gas and Propane Installation
Code (NSCNGPIC) CSA B149.1-00. Wear safety glasses and work gloves. Have fire extinguisher available during start-up and adjustment
procedures and service calls.
These instructions cover minimum requirements and conform to existing national standards and safety codes. In some instances, these instructions
exceed certain local codes and ordinances, especially those that may not have kept up with changing residential construction practices. We require
these instructions as a minimum for a safe installation.
INSTALLER: Affix these instructions
on or adjacent to the furnace.
CONSUMER: Retain these
instructions for future reference.
International Comfort Products, LLC
Lewisburg, TN 37091 U.S.A.
Table of Contents
1.SafeInstallationRequirements................. 3
2.Installation................................ 4
3.Combustion&VentilationAir .................. 8
4.Vent& CombustionAir Piping ................ 10
5.GasSupply andPiping...................... 29
6.ElectricalWiring ........................... 33
7.DuctworkandFilter ........................ 35
8. ChecksandAdjustments.................... 38
9.FurnaceMaintenance ....................... 40
10.SequenceofOperation& Diagnostics.......... 41
11.ConcentricVentTermination................. 45
TechSupportand Parts........................ 49
ELECTRIC SHOCK HAZARD
Failure to follow safety
warnings exactly could result
in serious injury, death, and/or
property damage.
Turn Off All Power Before
Servicing.
CARBON MONOXIDE POISNING AND FIRE
HAZARD.
Failure to follow safety warnings exactly could
result in serious injury, death, and/or property
damage.
This furnace is not designed for use in mobile
homes, trailers or recreational vehicles.
PrintedinU.S.A. 07/15/2004 440 01 1020 (04)