Filter
Top Products
SECTION 1 WATER FILTER START-UP
I
1D.
PROGRAM THE TIMER
I
I,
display
]
Q PRESENT TIME AND DAY
_ BACKWASH TIME
_ BACKWASH DAY
_ SETICLEAR
ON/OFF VACATION
V_,_.:J _ BACKWASH NOW
buttons
When the transformer is plugged into the electrical
outlet, 12:00 AM, SUnday began to flash in the time
display. Set the time of day, present day of week,
and days/time of backwash, as follows.
1. SET TIME OF DAY
a. Press the PRESENT TIME AND DAY
button [] once. The hour display continues to
flash.
b.
Press the SET/CLEAR button [] until the pres-
ent hour of the day shows in the display. Be sure
AM for morning hours, or PM for afternoon and
evening hours shows.
NOTE:
Press SET/CLEAR and quickly release to move the
hour display ahead 1 at a time to the correct hour. Or,
hold the SET/CLEAR button to move the display
ahead 2 hours each second, to the correct hour.
C. Press button [] once to steady the hour
display, and minutes begin to flash. Repeat step
lb to set the correct minutes.
d. Press button [] again to steady the minute
display (day will begin flashing). Figure 2 shows
the timer set at 3:30 PM.
2. SET PRESENT DAY OF WEEK
a. Press the SET/CLEAR button [] to set the
present day of the week in the display.
NOTE:
Press SET/CLEAR and quickly release to move the
day display 1 at a time. Or, _ the SET/CLEAR
button to move the day display ahead 2 days each
second.
b. Press the PRESENT TIME AND DAY
button [] again to steady the entire display.
Figure 2 shows the timer set at TUesday.
I o3:30]
EXAMPLE: This drawing
shows the present time of
day at 3:30 PM, and the
present day on TUesday.
Q PRESENT TIME AND DAY
{_ BACKWASH TIME
(_ BACKWASH DAY
_ SETICLEAR
_ ON/OFF VACATION
HOLD BACKWASH NOW
7
(continued)