Filter
Top Products
SECTION 2. PREPARE THE MACHINE FOR SEWING
Setting Spool Pins
t
Spool pin
The spool pins are used for holding the
spools of thread when feeding thread to the
machine.
To use, pull up the spool pins. Push down
for storage.
Adjust the Presser Foot Lever
Normal up __._
position
positior
High
position
P
position
'Presser foot
lever
J
The Presser Foot Lever raises and lowers your
presser foot.
You can raise it about 1/4""higher than the normal
up position for easy removal of the presserfoot or
to help you place heavy fabrics under the presser
foot.
• Thread Cutter
Jtter
You don't need a pair of scissors to cut the
thread after you finish sewing. Just use the
handy thread cutter.
Pull the threads to lengthen several inches
before starting the next seam.