Filter
Top Products
SECTION 2. PREPARE YOUR MACHINE FOR SEWING
Setting Spool Pin
• Adjust the Presser Foot Lever
• Thread Cutter
t
Spool pin =
The spool pin is used for holding the spool
of thread in order to feed thread to the
machine.
To use, pull up the spool pin. Push down
for storage.
Normal up
position
positior
High
position
P
position
'Presser foot
lever
J
The Presser Foot Lever raises and lowers your You don't need a pair of scissors to cut the
presser foot. thread after you finish sewing. Just use the
You can raise it about 1/4" higher than the normal handy thread cutter,
up position for easy removal of the presser foot or Pull the threads to lengthen several inches