Filter
Top Products
6. Insert the soft end of the hose, which is
opposite the swivel end, into the vac-
uum port directly above the drain.
7. Place the utility nozzle securely on the
swivel end of the hose and the vac is
ready for use.
NOTE: The swivel end of the hose is
removable if more hoses need to be
attached for more length from the vac. To
remove the swivel portion of the hose,
grasp the hose swivel and firmly pull it out
of the flexible hose. Connect the soft end
of a second hose (accessory #9-17820)
into the swivel end of the original hose by
forcing the sections together until they fit
tightly.
Blowing / On-Off
Port ...... Switch
Power Cord_.
Area
Variable Speed
Control
J Vacuum
Port
Caster
Feet _,
Caster
._ Hose
End
Utility
Nozzle
Larger
Opening
Power
Assembly
Hose
Insert the push button end of the "Pos-I-
Lock" hose into the inlet of the vac. The
hose should snap into place. To remove
the hose from the vac, press the release
button in the hose assembly and pull the
hose out of the vac inlet, as shown.
Open End
Of Hose
Press and
Pull
Lock t
Release
Button
To Store Your Accessories
1. Slide extension handles and accesso-
ries into the slotted areas of the
caster feet for storage.
2. To remove the accessories, rotate and
pull upward
7