Filter
Top Products
2
TABLE OF CONTENTS
Safety Instructions 2
Electrical Specifications 2
Product Features 2
Installation Instructions 3
How to Use 3
SAFETY INSTRUCTIONS
WARNING: When using this device, always exercise basic safety precautions including the following:
• Read all instructions before use or installation.
• Never connect this device to any electrical circuit with other than 12, 24 or 32 volt Direct Current or exceed
the amperage draw specified below.
• Never install, use or service any component of this device in an atmosphere with potentially flammable or
explosive vapors.
SPECIFICATIONS
Product Name:
VacuFlush Status Panel
Shipping Information:
Carton Size:
6 in x 6 in x 4 in (15.2 cm x 15.2 cm x 10.2 cm)
Electrical:
Current and Wattage per Indicator Light
Magnetic, manual reset circuit breaker
Maximum wire size per terminal block pin = 12 gauge
PRODUCT FEATURES:
• Continuously monitors status of vacuum for proper operation.
• Magnetic circuit breaker designed to protect the vacuum pump from damage.
• Allows the boater to shut the system down during the night.
• Deluxe panel complements bathroom decor.
• Indicates loss of electrical power or system power off.
Dimensional Specifications 4
Parts List 4
Control Panel Mounting Template 5
Wiring Diagrams 5, 7
Warranty Information 8
12 VDC
Amps
Watts
.012 – .016
.15 – .22
5 Amp
10 Amp
SIZE
5
10
F.L. AMPS
6.75
13.5
TRIP AMPS
32
32
MAX VDC
24 VDC
.012 – .016
.29 – .45
32 VDC
.020 – .024
.64 – .86