Schneider Electric dx8100 Home Security System User Manual


  Open as PDF
of 4
 
f. Locate the “Symantec Endpoint Protection 11.0 License + Essential 12 Months Support License” option. Then click the BUY NOW button.
Figure 6. Symantec Endpoint Protection 11.0 License Link
g. Follow the remaining Symantec steps to purchase the software. You can download the software or order the package.
Installing Symantec Endpoint Protection Client
The Symantec Endpoint Protection Client is the only Symantec Endpoint Protection application that you can install on the DX8100 server.
NOTES:
• You cannot install the client on the DX8100 server from a remote computer.
• If you download the Symantec Endpoint Protection Manager to the DX8100 server, do not install it on the server. You must install the Endpoint
Protection Manager on a remote computer. The DX8100 server is not designed to support security administration.
• You can administer Symantec Endpoint Protection either locally at the DX8100 server or from a remote computer on the network.
INSTALLING FOR LOCAL ADMINISTRATION
The Symantec Endpoint Protection Client is installed and administered on the DX8100 server.
1. From the Windows environment on the DX8100 server, browse to the location of the Symantec Endpoint Protection Setup application.
2. Click Setup and follow the Symantec installation instructions to install the software.
3. Configure the Symantec Endpoint Protection Client. Refer to the Symantec Endpoint Protection documentation.
4. Restart the DX8100 application.
INSTALLING FOR REMOTE ADMINISTRATION
The Symantec Endpoint Protection Client is installed on the DX8100 server. The Symantec Endpoint Protection Manager is installed on a remote computer.
The client is administered from the remote computer.
1. From the Windows environment on the DX8100 server, browse to the location of the Symantec Endpoint Protection Setup application.
2. Click Setup and follow the Symantec installation instructions to install the software.
3. Install and configure the Symantec Endpoint Protection Manager on a remote computer. Refer to the Symantec Endpoint Protection documentation.
4. Restart the DX8100 application..
REVISION HISTORY
Manual # Date Comments
C4620M 7/09 Original version.
Pelco and the Pelco logo are registered trademarks of Pelco, Inc. ©Copyright 2009, Pelco, Inc. All rights reserved.
All product names and services identified throughout this document are trademarks or registered trademarks of their respective companies.
The absence of a trademark or registered trademark from this document does not constitute a waiver of intellectual property rights.
The materials used in the manufacture of this document and its components are compliant to the requirements of Directive 2002/95/EC.
 previous