Schlage FE595 Pet Fence User Manual


 
8
Programming for All Models
Label is located on front of guide and back of keypad assembly.
Programming Code: 123456
User Code A: 4321
User Code B: 5678
S/N: 1-00000000
Model: BE365
Example
Example
Four-Digit User Codes
(4DUC)
• Activates lock
Can be changed
Up to 19 user codes
Won't program lock
Six-Digit Programming Code
(6DUC)
Programs lock
Can be changed
Won't operate lock
Schlage Button (on front of lock)
Lights orange while in programming mode.
Flashes green when programming is successful.
Lights red when there is an error. Retry steps or see troubleshooting guide on page 11.
Press to exit programming mode at any time.
• Wait until
button stops fl ashing before entering additional codes.
Add a new user code
6DPC New 4DUC Reenter New 4DUC
Delete one existing or preset user code
6DPC Existing 4DUC Reenter Existing 4DUC
Change current or preset programming code
IMPORTANT: If you forget your new programming code, you will have to reset the lock.
6DPC New 6DPC Reenter New 6DPC
Enable/disable all user codes
1. Disable All User Codes: 6DPC
2. Enable All User Codes: 6DPC
Turn beeper on or off (preset is on)
NOTE: Lock will still beep when battery is low.
6DPC
Delete ALL user codes at once
IMPORTANT: This will delete all the user codes but not the programming code.
6DPC Reenter 6DPC
= Schlage Button
= Specifi c Number on Keypad
6DPC = Six-Digit Programming Code
4DUC = Four-Digit User Code
Legend