About this manual
This housing is designed for outdoor installation.
Before installing and using this unit, please read this manual carefully. Be sure to keep it handy for later reference.
CAUTION:
Install this housing securely according to this
installation manual. Be aware that allowing the bracket
to fall with the camera on it may cause personal injury.
b Specifications
Color: Beige
Material: Metal
Waterproof Standard: Conforming to IP66
Operating Environment
(with power source connected) :
Temperature; -30°C - +50°C (-22°F - +122°F)
Humidity; less than 90% RH (no condensation)
Weight: Approx. 2.5 kg (5.5 lb)
Dimensions:
b Specifications of Heater
(built into VA-CM8C/CM8S)
Automatic switch ON/OFF temperature:
ON; Approx. 5°C (41°F)
OFF; Approx. 15°C (59°F)
Power supply: 24 V AC ± 10%, 50/60Hz
Power consumption: Max. 35 W (When heater turned on)
Example of
wall mounting
Example of
pendant mounting
Important
• Be careful when opening holes for installing the
unit. Work with the power and video cables pulled
out for easy installation.
• Make sure to properly perform waterproofing for the
ceiling or wall where you are installing the unit.
• Make sure that the surface in the installation
location has no unevenness and is strong enough
to bear the total weight of the unit.
Ǿ248 (9.8)
182 (7.2)
6 (0.2)
Unit: mm (inch)
INSTRUCTION MANUAL
Outdoor Housing
VA-80EX
Features and specifications are subject to change without
prior notice or obligations.
Accessories
Waterproof tape
Hexagonal wrench
Screws, washers
(for power board unit)
This installation should be made by a qualified service
person and should conform to all local codes.
EnglishFrançaisEspañolDeutsch中文简体
L9BHK_WA(VA-80EX).book 0 ページ 2007年1月12日 金曜日 午後3時35分