Sanyo THS4232 Air Conditioner User Manual


 
Operation with the Remote Control Unit (continued)
2. Manual Operation
NOTE
Check that the circuit breaker on the power panel is turned on and that the
operation selector of the indoor unit is in the ON position.
If the automatic operation settings of the unit are not satisfactory, press the
setting buttons below to change the settings as desired.
STEP 1 Press the MODE selector button and select the desired
mode.
For heating operation
For cooling operation
STEP 2 To start the air conditioner, press the ON/OFF
operation button.
STEP 3 Press the TEMP. setting buttons to change the
temperature setting to the desired temperature.
Adjustable temperature range:
86°Fmax.
60 °F min.
STEP 4 Set the FAN SPEED selector button to the setting you
want.
NOTE
If the fan speed is set to (Automatic), the fan speed
switches automatically according to the difference
between the actual room temperature and the
temperature setting.
STEP 5 Press the FLAP button and set the airflow direction as
desired.
(Refer to ‘‘Adjusting the Airflow Direction’’ on
page 21.)
To stop the air conditioner, press the ON/OFF operation button again.
14 OI-212-14EG
oi212001
STEP 4
STEP 3
STEP 2
STEP 1
STEP 5