Filter
Top Products
Other Features
Ventilation Control The Vent Control is located behind the front grille.
When set at CLOSE, only the air inside the room
can be circulated and conditioned. When set at OPEN,
some indoor air can be exhausted from the room.
Fan Switch The Fan Switch is located under the control panel.
To reach it, you need to remove the front grille,
knobs and the control panel.
Remove the front grille to adjust the louvers side-to-side.
The direction of the heated or cooled air may be adjusted by removing
and turning the louvers around.
To change the louver direction, remove the front grille and 1 louver screw that
hold the louvers in place. Turn the louver section 180° (end for end), replace the
screws and replace the front grille. The textured face of the louver section must
be facing toward the room side.
To Adjust the Air Direction
7OI-602-03EG
oi602000
VENT
CLOSE
OPEN
FAN
CONT
CYCLE
Louver screw
Front grille