Filter
Top Products
Trouble Shootin
g
If you have a problem with you cleaner, consult the handy guide below. If the
cleaner is
malfunctioning, do not operate it before asking for service.
Noisy operation
Low Suction
Clean the fil
ter and empty the dust cup.
Clean or replace the filt
er.
Rem
ove the blockage.
Put the dus
t cup in place.
Over-heating/
Automatically
Stoppin
g
Clean
the filters, and empty the dust cup. Check for
blockages
and unblock and allow it to cool.
Plug unit fi
rmly.
Cannot Find the
Combinatio
n
Nozzl
e
Nozzle
is clipped into a compartment at the bottom
edge
on the back of the vacuum cleaner (between
the wheels)
.
It is a single
attachment.
Floor Brush hard
to push
Due
to the strong suction power, it may be difficult
to
push, especially thick carpet. Rather than force to
use
the floor brush, lift up the Floor Brush
momentarily
to allow air to flow into the vacuum
releasing to the built up suction pressure , then do
well to push
floor brush.
Slide
and open the suction adjusting plate located
on
the hose handle grip. This will reduce suction
power of the floor head.
Cord doesn’t fully
rewin
d
Pull out the
cord and rewind again.
6
Made in China