Filter
Top Products
10
Care of filter:
A severely soiled or clogged filter should be thoroughly
washed with fresh tepid water.
A neutral detergent could be used if required.
To assure the best results, we recommend cleaning the filters
once a year, depending on usage.
Drying
Washing
Technical Specification
Input power : 350-400W
Input voltage : 220-240V , 50-60Hz
Protection class : class II
Power cord length: 4.5m
Dust capacity : 0.4L
Trouble Shooting
If you have a problem with your vacuum cleaner, consult the handy guide
below. If the vacuum cleaner is malfunctioning, do not operate it. Contact your
dealer or the nearest Sanyo Service center.
Problem Possible Cause Possible Solution
Cleaner won't run.
Not firmly plugged in.
No voltage in wall outlet
Plug unit in firmly.
Check fuse or
breaker.
Suction does not
increase after
cleaning out the dirt.
Filter dirty. Clean out the filter.