TM
EDGE GRABBER /
The Edge Grabber system is designed to help
clean all the way up to the baseboards. The
suction shutter is opened when the floor
nozzle is pushed against the wall.
TM
CARE OF TURBO CLEAN /
TM
Before caring for the TURBO CLEAN , be sure to turn OFF the switch of the unit and disconnect
the plug from the outlet.
If needles, pins or waste paper get stuck in the suction inlet, remove them after going through
the above procedure.
Trying to remove them during operation is dangerous.
9BF-D-P111-08300 0905-
E/ARA
1
CARE AND MAINTENANCE
If you have a problem with your vacuum cleaner, consult the handy guide below. If the
vacuum cleaner is malfunctioning, do not operate it. Contact your dealer or the nearest Sanyo
Service Center.
Edge grabber