Filter
Top Products
PRODUCT MAINTENANCE
9
3
1
1
2
2
Caution: Be sure to turn the ON/OFF switch to the " "position and disconnect
the power cord from the wall outlet before cleaning.
Caution: Do not use organic solvents, including thinner, or other strong cleaning liquids
such as alkaline detergents. Use of such substances may cause discoloration or
deterioration of materials resulting in deformation or cracking.
MAIN UNIT
CLEANING THE AGITATOR ASSEMBLY
When threads get caught in the agitator assembly, clean the assembly. (SC-180 only )
ELECTROSTATIC MICRON FILTER
Wet a soft cloth with neutral
detergent solution and wring
out excess liquid.
Wipe the external surfaces
of the unit.
Wipe with a dry cloth.
Remove threads caught in the agitor assembly
by cutting them with scissors.
The electrostatic micron filter should be replaced at least once every 8 months in order
to maintain cleaning performance. Only use genuine Sanyo replacement filters.
Remove the dust cover and replace
the electrostatic micron filter.
Replace the dust cover.
Caution: The electrostatic micron filter cannot be reused.
N
E
U
TRAL
DET
E
R
GEN
T
Threads
Agitator assembly
Electrostatic micron filter
Dust cover