Filter
Top Products
CARE AND MAINTENANCE
If you have a problem with your vacuum cleaner, consult the handy guide
below. If the vacuum cleaner is malfunctioning, do not operate it. Contact
your dealer or the nearest Sanyo Service Center.
9BF-D-P111-07100 0709-
E
0
Edge grabber
TM
CARE OF TURBO CLEAN
TM
Before caring for the TURBO CLEAN , be sure to turn OFF the switch of the unit and
disconnect the plug from the outlet.
If needles, pins or waste paper get stuck in the suction inlet, remove them after going
through the above procedure.
Trying to remove them during operation is dangerous.
TM
EDGE GRABBER
The Edge Grabber system is
designed to help clean all
the way up to the baseboards.
The suction shutter is opened
when the floor nozzle is
pushed against the wall.