Filter
Top Products
OI-432-04 - 9EG
4 - 9
■ How to start collective operation
To start collective operation (ALL or ZONE)
In the ALL or ZONE mode, no flap setting can be performed. If necessary, you
should select the GR mode and use the FLAP button
NOTE
Power Turn the power supply switch on 5 hours or more before starting operation.
1 Press the SELECT button and select ALL or ZONE.
In case of ZONE collective operation.
2 Select the ZONE No. to be operated by pressing ZONE button.
3 Press the ON button.
4 Set the operation mode by pressing the MODE button.
5 Set the desired temperature by pressing one of the temperature setting buttons .
6 Set the desired fan speed by pressing the FAN SPEED button.
7 Select the control mode.
Stop Confirming the ZONE No. to be selected or ALL indication, press the OFF button.
7
2
1
5
6
4
Stop
3
4
4 SHA-KC64UG 5/2/01 2:30 PM Page 9