Filter
Top Products
– 27 –
SM830092
8. INSTALLATION INSTRUCTIONS
3) Electrical Wiring
General Precautions on Wiring
(1) Before wiring, confirm the rated voltage of
the unit as shown on its nameplate, then
carry out the wiring closely following the
wiring diagram.
(2)
Provide a power outlet to be used
exclusively for each unit, and a power
supply disconnect and circuit breaker for
overcurrent protection should be
provided in the exclusive line.
(3) T
o prevent possible hazards from
insulation
failure, the unit must be grounded.
(4) Each wiring connection must be done in
accordance with the wiring system
diagram. Wrong wiring may cause the
unit to misoperate or become damaged.
(5) Do not allow wiring to touch the refrigerant
tubing, compressor, or any moving parts
of the fan.
(6) Unauthorized changes in the internal
wiring can be very dangerous. The
manufacturer will accept no repsonsibility
for any damage or misoperation that
occurs as a result of such unauthorized
changes.
(7) Regulations on wire diameters differ from
locality to locality. For field wiring rules,
please refer to your LOCAL ELECTRICAL
CODES before beginning. You must
ensure that installation complies with all
relevant rules and regulations.