Sanyo 12KLS51 Air Conditioner User Manual


 
-3-
control circuit fuse & microprocessor, factory wired & mounted, that receives & processes all
commands & transmissions from the system Infrared Remote Controller. Indoor unit(s) shall also
contain an Operation Switch with visible lamps for operation, standby & timer functions, as well
as, a system test switch & a manual ON/OFF switch. Unit(s) shall contain a room sensor
thermistor, a coil temperature safety thermistor to prevent freeze-up in the A/C mode, a factory
installed condensate drain pan, drain hose & fitting, and refrigeration line connections with flare
nuts. Unit(s) shall contain knockouts on both sides of the casing that allow refrigerant lines to be
brought to the unit from multiple directions. A motorized louver/flap, controlled by the infrared
remote controller, shall provide automatic, full oscillating supply airflow, as well as being capable
of being placed in a set, stationary position. Unit(s) shall also contain adjustable, horizontal air
louvers to provide user defined, directional airflow. Unit(s) shall be provided with anti-mold, poly
type washable air filters that can be easily removed without removing indoor unit casing. Indoor
unit(s) shall be powered by voltage from the matching outdoor unit(s).
4) AVAILABLE SANYO ACCESSORIES – All Wall Mount Models
Insulated Copper Line Sets, Condensate Pumps, Outdoor
Section Mounting Brackett, and Odor Control Filters.