Sanus Systems WFV66 Indoor Furnishings User Manual


 
Step 14: Add Mid Shelves
Thread a Shelf Pin (e) into the desired location in the Panels (v,w,x). For each shelf, four Shelf Pins will be required. Insert each Mid
Shelf (r) into the assembly and press t onto the Shelf Pins. Make sure the wood strip on each shelf is facing toward the front. See Dia-
gram 14 for assistance. Note: Diagram 14 is a Back View.
Detailed View Diagram 14
v
x
x
e
r
w
Step 15: Add Back Panel
Position each Back Panel (u) up against the assembly and thread a Wood Screw (f) through it and into the Back Stretcher (p). Repeat
process until each Back Panel is secured with four Wood Screws. Tighten each with a Phillips screw driver. See Diagram 15 for assis-
tance.
Detailed View
Diagram 15
p
f u