Filter
Top Products
How To Assemble
CAUTION:
Assemble the cleaner completely before plugging into an electrical outlet.
CAUTION:
Moving parts, stay clear of brush roll when plugging in. Make sure brush roll is clear of moving parts
when plugging in.
NOTE:
Features may vary by model yet all parts assemble the same.
Step A Unpack Body of Vacuum
and Handle
1. Remove vacuum body and handle from carton. Locate
the handle release button on body and the handle tabs
on handle.
Step B Attach Handle
2. Position handle above vacuum body. Line up the
handle tabs to the notches in the opening at the top of
the vacuum body.
3. Press down on the handle release button as shown
above. Slide the handle down into the unit, until it clicks
into place.
Vacuum Body
Handle
Handle
Tabs
Handle
Release
Button
3