Samsung WC12ZR Air Conditioner User Manual


 
Airing Your Room
If the atmosphere in your room is stale, you can air it using the Fan
feature and if necessary, evacuate the stale air outside.
1 If you wish to evacuate stale air outside, push the ventilation lever on the
front of the unit to the right and the open position ( ).
Result
: The air inside the room circulates and stale air is evacuated
outside.
Otherwise, push the ventilation lever to the left and the closed position ( ).
Result
: The air simply circulates inside the room.
2 If necessary, press the (On/Off) button.
Result
: The operating mode indicator (COOL or FAN) on the
unit comes on.
The air conditioner starts up in the mode selected
when the unit was last used.
The unit beeps twice.
3 If the FAN indicator is not lit up on the unit:
Press the FAN button on the remote control
or
Press the POWER/MODE button on the unit one or more times until
the FAN indicator lights up
Result: The unit beeps each time you press POWER/MODE.
The air conditioner starts up in Fan mode.
You can change modes at any time.
When the air conditioner is in Fan mode, the
temperature is not displayed; moreover, you do not
need to set the temperature.
4 To set the fan speed to... Then...
High Press the button on the remote control.
Low Press the button on the remote control.
Result
: Each time you press a button, the unit beeps.
5 To control the direction of the air flow, refer to page 10.
Remote Control
Control Panel
E-
9
ENGLISH