Filter
Top Products
Installing the Front Panel
Open the electrical component box cover removing the screws.
1
Connect the cables of the front panel to the PCB as shown in figure.
2
Close the electrical component box cover and secure the screws.
3
Install the front panel using two hooks on the both sides of the indoor
unit.
4
Secure the front panel to the indoor unit using the bolts(4EA).
5
◆ When user’s optional accessory is a wireless remote controller, you
have to install the receiver & display unit; refer to page 60.
◆ There are four kinds of air blocking kits. Fill up the air outlet(s) with
one or more kits depending on the situation, then install the
insulation to block air completely.
NN
NN
oo
oo
tt
tt
ee
ee
Hook and Eye
Eye
Front panel fixing holes
Air blocking
kit
Front Panel
E-
52