Filter
Top Products
6_ operating the cleaner
operating the cleaner _7
02 OPERATING THE CLEANER
Operating the cleaner
*option
Select Models Only
Combination
Dusting Brush/
Upholstery Tool
Crevice
Tool
Extension
Wand
Hose
Wand
Hose
Wand
Base
Quick Release
Cord Wrap
Power Cord
SPECIAL ON-BOARD TOOLS
Your vacuum is not only a powerful carpet and rug cleaner, it’s also a versatile
above floor vacuum cleaner when you select one of the special tools.
1. Raise Handle to Upright Position.
2. Grasp the end of the Hose Wand and lift Hose
Wand to separate from the Hose Wand Base.
3. Attach tools by firmly pushing onto Vacuum Hose
or Extension Wand.
Combination Dusting Brush/Upholstery Tool:
Two Types of cleaning tools are included in one
attachment: rotate for desired tool.
• Use Brush side to dust furniture, blinds, books,
lamps, shelves, and baseboards.
• Use Upholstery side for curtains, draperies,
cushions, fabrics.
Crevice Tool:
Use in tight narrow spaces.
Extension Wand:
Use with desired attachment for a longer reach.
Mini Turbo Brush (Select Models):
Use rotating brush action for small areas such as
stairs and upholstery.
POWER CORD STORAGE
1. To use your vacuum, remove the cord and plug it into an electrical outlet. For your
convenience, there is a quick release cord wrap for easy cord removal.
2. When you are finished cleaning, turn vacuum cleaner off.
3. Unplug power cord by grasping the polarized plug (NOT the cord) and disconnect
from outlet.
4. Loop power cord around cord wraps on the back of the vacuum as shown.
5. Clip molded plug to power cord to secure.
Note: Press gently when using Mini Turbo Brush to gain maximum cleaning. Too
much pressure could cause the brush to stop rotating.