Filter
Top Products
English5
PRODUCT INTRODUCTION
FEATURES
State-of-the-art Access Controller
SSA-P400(T)/SSA-P401(T) is a state-of-the-art door access controller device that provides a high level security
system in an affordable price, meeting the needs in the security industry.
SSA-P400(T)/SSA-P401(T) can control access of 2-4 doors with simple manipulation and high level stability as well
as its affordable cost.
You can specify up to 1000 ~ 20,000(30,000/ 40,000/50,000) instances of card registration to your preference,
which you can delete or change as necessary. The built-in event memory can save up to 20,000 ~ 29,500(14,000/
8,000/3,000) instances of entires and alerts according to the number of registered cards.
You can connect a wide range of readers via the 4 reader ports, and operate the reader in either RF Card or RF
Card + PW mode.
15 independent input ports can be used to connect to various devices such as Exit Button, Door Contact Sensors,
PIR Sensors, and Window Breakage Sensors to reinforce security.
You can use the keypad (optional) to confi gure your settings with easy.
You can establish the independent or network connection via RS-232 or RS-422 communications. SSA-P400(T)/
SSA-P401(T) is equipped with a built-in TCP/IP module, which enables you to establish LAN communications. All
settings including card registration information, I/O settings, Real Time Clock, Time Schedules and all Event
Transaction Reports can be downloaded /uploaded from/to the host computer with software supporting a variety
of reporting formats.
Installed and managed inside the security zone for preventing the risk of damage, SSA-P400 (P401) can implement
a high level security access control system with multiple control options, best fi t for access control and time &
attendance management.
Standalone Operation
By connecting to 4 card readers, you can use this product to control the access of the maximum of 4 doors. This
controller determines to allow access by reading data from the card reader, and controls the open/close of the
door relay and enables you to change other output settings. Upon receipt of an incoming external input signal
(sensor or Exit button), it launches an output device such as the relay. This controller has an independent control
system, assuring a normal operation regardless of problems on any other systems and, not affecting them in the
reverse situation.
Anti-Pass Back
A door has two card readers installed: one for the entrance, and the other for the exit, so anyone who enters
should recognize his/her card on the reader at the entrance time before he can exit normally. If a person does not
go under the card recognition process and just follows another person’s way inside the door, the person is not
allowed to exit when he/she recognizes the access card on exit card reader, and the anti-pass-back error (APB
error) occurs which will be saved into the internal memory. And you can confi gure to output a certain signal through
a specifi c port if such an error occurs. (Make your setting using the Application program (controlled access, time
and attendance management, etc) – I/O Setup – APB Error) You can use Anti-Pass Back for controlling two doors
independently or in synchronization with each other.
Computer-based Management
All records of authorized or unauthorized accesses and any external signal will be saved in the internal memory.
You can download such data onto your computer according to the specifi ed communications protocol. With the
downloaded data, you can store, process, and create a report based on your query (access and alert details, etc)
on the central computer.
Door Count Setup (2/3/4 doors)
As it is equipped with 4 card readers, you can use this product to control the access on a maximum of 4 doors.
For controlling 2 doors, install reader 1 and reader 2 on door 1 while installing reader 3 and reader 4 on door 2. For
controlling 3 doors, install reader 1 and reader 2 on door 1 while installing reader 3 on door 2, and reader 4 on
door 3. For controlling 4 doors, install one reader on each door, totalling 4.
product introduction