Filter
Top Products
SPEED DOME CAMERA User’s Manual
45
ENGLISH
SPEED DOME CAMERA User’s Manual
44
5. To change the camera settings, select Edit
from the upper menu first. Select the item to
change, and then make the necessary
adjustments.
6. If you select the Scene Adj. item, such items
as Shutter, AGC, SSNR, Sens-Up, White
Balance and DIS can be set up differently in
every Preset item.
Functional Description
•
In the White Balance setting of the individual Preset Scene Adj., the AWC selection is not
available.
Notes
Preset Edit [001]
PTZ 267/051/1X
Focus Mode Manual
Brightness 050
Iris AUTO
Back Light OFF
Day & Night COLOR
Motion Det. OFF
Scene Adj
Scene Adj. [001]
Shutter ---
AGC MIDDLE
SSNR MIDDLE
Sens-Up AUTO
White Balance ATW
DIS OFF
Group SEQ: Sequence surveillance can be executed and set up and data can be
deleted. Up to 6 groups can be registered.
Swing SEQ: Swing surveillance can be executed and set up and the data can be
deleted.
Pan Swing : Swing surveillance for the Pan direction is executed and set up. Data
is deleted.
Tilt Swing : Swing surveillance for the Tilt direction is executed and set up. Data is
deleted.
P&T Swing: Swing surveillance both for the Pan and the Tilt directions are
executed and set up simultaneously. Data is deleted.
* Setting : The Preset Position for Swing function is selected with the joystick and confirmed with the
Execution key. SPD is the moving speed (001-240˚/sec). DWL is the stop time (00-99 sec). Press
the Execution key in the location with selection mark to finish the setting process.
* Execute : Swing surveillance is executed. Stop key designates this function.
* Clear : Data in the Swing function is deleted.
Sequence Setting
Preset
Swing SEQ
Group SEQ
Tour SEQ
PTZ Trace
Auto Run
Power On Resume OFF
Group SEQ
Group 1
Group 2
Group 3
Group 4
Group 5
Group 6
Sequence Setting
Preset
Swing SEQ
Group SEQ
Tour SEQ
PTZ Trace
Auto Run
Power On Resume OFF
Swing SEQ
Pan Swing
Tilt Swing
P&T Swing
Setting : Preset position for swing is selected with the joystick and confirmed with
the Execution key. SPD is the moving speed (001-240˚/sec). DWL is the
stop time (00-99 sec). Press the Execution key in the location with
selection mark to finish the setting process.
Execute : Swing surveillance can be executed. Stop key will stop this function.
Clear : Swing data can be deleted.