Filter
Top Products
3-1.
SETTING UP YOUR ACCOUNT FROM COMPUTER
1)
From your PC, launch your web browser.
Supported browsers: Internet Explorer 8+,
Chrome, FireFox, Safari
2) Go to http://www.samsungsmartcam.com.
3) Click <Starting SmartCam>.
You need to install your plug in to
automatically search for cameras connected
to the network and view the video in your camera.
4) Create user ID between 8 to 14
alphanumeric character. You can use
letters, numbers and periods.
5) Create password between 8 to 14
alphanumeric character. You can use letters, numbers, periods and
commas between 8-14 characters.
6) Confirm Password.
7) Enter rest of the requested information and click <Sign Up>.
3-2.
ADDING YOUR CAMERA
1) Click <Yes> in the pop-up window of
camera registration after completing
your member sign-up.
2) Click <Next> if the camera LED status
is solid green.
3) Select the serial number of the camera
to be added from the camera search
list.
If the camera is not found, enter the
serial number manually.
The computer and the camera has to be on the same network router to
auto detect the cameras.
4) Click <Next>.
5) Create <Camera Name> and <Camera
password>.
Create camera password using
alphanumeric characters between 1 to 8
without any space. Example: 1234
6)
Click <Next>.
3-3.
CONNECTING CAMERA TO WI-FI NETWORK
1) After adding the camera, click <Yes>
in the wireless network setup pop-up
window.
2)
Select your Wireless Network from the
list.
If your Wireless Network is hidden, select
<Other Wi-Fi Networks (not listed)>.
3)
Enter the password of your Wireless
Network and click <Next>.
Select <Display password> to display the password.
4)
Click <OK>.
5)
Unplug the network cable from the
camera and the router.
The camera LED will turn from flashing
blue to solid green in 30 seconds. This
confirms the camera is connected to your wireless network. You can now
unplug and place the camera anywhere within your wireless network
range. If the camera LED did not turn solid green, please contact our tech
support at 1-877-349-3149.
6) Click <Finish> if the <Finish> button is
activated.
3-4.
VIEWING LIVE VIDEO
1) Click <Go To My SmartCam>.
2) Select a camera from the camera list at
the upper left hand of the screen.
3)
Enter the camera password and click
<Apply>.
J
If you forget the camera password, it must be
reset.
Please refer to the user manual for details.
Check <Remember> to connect the camera without entering the camera
password.
4) When viewing the camera for the first
time, you must install the web viewer
plug-in. Please click on the <Download
Plug-in> and install the plug-in.
Browser will be restarted and you have
to re-login to your account.
3-5.
ALARM & NOTIFICATION
1) Click <Setup>.
2) Select the <Alarm & Notification> tab.
3) Check <Motion Sensitivity> for motion
detection.
Check <Audio Sensitivity> for audio detection.
4) Adjust the sensitivity.
5) Configure the alarm receipt method.
J
Configure Gmail account and password first to use YouTube/Picasa/Gmail.
3-6.
ALARM RECEIPT SETTING
YouTube
Automatically
uploads 30 second clip to your private YouTube
account.
1) Select the Google.
2) Check <Use> of YouTube.
3)
Enter your Gmail address and password.
4) Click <Save to Google>.
J
If you do not have a YouTube account, please go to YouTube.com and register
an account. The recorded videos are 30sec clips.
Picasa
Automatically uploads a image to your private Picasa account.
1) Select the Google.
2) Check <Use> of Picasa.
3)
Enter your Gmail address and password.
If your Google email ID and password are saved, check the use of Picasa only.
4) Click <Save>.
J
The Picasa account information of the user is
the same as the YouTube account.
Gmail
The event alarm is sent through Gmail.
1) Select the Google.
2) Check <Use> of Gmail.
3)
Enter your Gmail address and password.
If your Google email ID and password are
saved, check the use of Gmail only.
4) Click <Save>.
5) Enter your Gmail address to receive the
notification e-mail and click <Add>.
Twitter
When an event is detected, the notification message is sent to
the user’s Twitter account.
1) Select the Twitter.
2) Click <Request URL>.
3) Click <Access Twitter>.
4) Enter the Twitter ID and password.
5) Click <Authorize app>.
3-7.
ALARM SCHEDULE SETTING
1) Click <Setup>.
2) Click the <Alarm Schedule> tab.
3) Select <Only Scheduled Time>.
Select the time slot to enable detection.
4) Click <Apply>.
5) Select the <Time> tab.
6) Select the user’s time zone in <Time
Zone> and click <Apply>.