Filter
Top Products
3
2
OPERATING THE CLEANER
2-1. POWER CORD
2-2. POWER CONTROL (INFRARED CONTROL)
HANDLE CONTROL
1. Vacuum cleaner ON/OFF ( )
Press the ON/OFF button to operate the vacuum cleaner.
Press again to stop the vacuum cleaner.
2. Vacuum cleaner MODE (-/+)
Press the MODE button repeatedly to select the correct
mode.
(ON) MIN → MID → MAX
3. Using Auto mode
Press the Auto button to operate the vacuum
cleaner automatically.
[The cleaner is controlled by using
infrared signals.]
- HOSE
NOTE : If the remote handle control is not
working, the cleaner can be operated
using the control button on the body of
the machine.
Press the power control button repeatedly to select the
correct mode.
(ON(MAX) → OFF)
The filter light is illuminated when the dust
pack requires checking or emptying.
An audio signal will also sound.
This indicates that the automatic suction
mode is selected. The level of suction is
indicated by the LED display.
The IR light indicates the part that
receives the infra-red signal from the
handle control.
- BODY
NOTE
When removing the
plug from the
electrical outlet, grasp
the plug, not the cord.
Please make sure your
cable is fully extended
before use.
SENDER
DJ68-00368Q-04 9/10/08 9:53 AM Page 4