Filter
Top Products
PROBLEM CAUSE REMEDY 0
- IF YOU HAVE A PROBLEM
Motor does not start.
No power supply.
Thermal cut-out.
Check cable, plug and socket.
Leave to cool.
Suction force is gradually
decreasing.
Nozzle, suction hose or tube
is blocked.
Check for blockage and
remove it.
Cord does not rewind fully. Check that the cord is not
twisted or wound unevenly.
Pull the cord out 2-3m and
push the cord rewind button.
Vacuum cleaner does not
pick up dirt.
Crack or hole in hose.
Check hose and replace if
required.
Low or decreasing suction
Filter is full of dust.
Please check filter and, if
necessary, clean as illustrat-
ed in the instructions.
10
DJ68-00339U (EN)-0.3 8/19/08 2:26 PM Page 11