Filter
Top Products
GB
Install the safety wire to the anchor bolt (2) in the
following sequence.
1. Apply a nut to the anchor bolt.
2. Fix the safety bracket into the anchor bolt.
3. Apply two nuts to the anchor bolt.
4. Hook and insert a safety wire into the safety bracket.
Hook and insert the other end of the safety wire into the
CEILING MOUNT BRACKET.
Insert the cable of the camera power, video output,
communication and others through the holes on the
side of the bracket.
Put the bracket through the hole into the ceiling.
Hook and insert the CEILING MOUNT BRACKET to anchor
bolt (1).
Turn four screws clockwise for bracket fixing included in
the CEILING MOUNT BRACKET to fix the bracket to the
ceiling board.
Make sure to apply two nuts to the anchor bolt (1).
3
4
5
6
7
8
9
Safety wire
Nut
Turn clockwise
Nut