Filter
Top Products
E-16
Selecting Dry Mode
Select Dry mode if the room is too humid. Using this mode will slightly lower the
room temperature.
1
Press (ON/OFF) button.
Result
: The air-conditioner will turn on with the mode selected when
the unit was last used.
Caution
The air-conditioner has a built-in protection mechanism to prevent the
unit from being damaged when it is started immediately after being:
Plugged in
Stopped
The air-conditioner will start up after three minutes.
2
To select Dry mode, press button until Dry appears on the remote
control display.
Result
: The air-conditioner will run in Dry mode.
3
To adjust the temperature, press button to set the desired
temperature. The temperature can be set between
18°C(65°F) and 30°C(86°F)
.
Result
: The temperature is adjusted by 1°C(1°F) when
button is pressed.
The fan speed is adjusted automatically in Dry mode.
4
To adjust the airflow direction refer to page 18~19.