Filter
Top Products
E-17
ENGLISH
Selecting Fan Mode
Select Fan mode to circulate air without changing the temperature.
1
Press (ON/OFF) button.
Result
: The air-conditioner will turn on with the mode selected when the
unit was last used.
Caution
The air-conditioner has a built-in protection mechanism to prevent the
unit from being damaged when it is started immediately after being:
Plugged in
Stopped
The air-conditioner will start up after three minutes.
2
To select Fan mode, press
button until Fan appears on the remote control
display.
Result
: The air-conditioner will run in Fan mode.
3
Press button to select the fan speed until the required setting is
displayed.
Low
Medium
High
4
To adjust the airflow direction refer to page 18~19.
Note
If you are not using air conditioner for an extended time maintain the
unit after it was in Fan mode for 3 to 4 hours. Having inside unit in dry is
a good way to keep it.