Samsung MH12ZV-26 Air Conditioner User Manual


 
Setting the Time
Your air conditioner contains a clock used to start and stop the unit
automatically at a given time.
You must set the time when you:
Purchase the air conditioner
Replace the batteries
N
N
o
o
t
t
e
e Be sure to reset the time when you change clocks from
standard todaylight savings time and vice versa.
Setting the T
ime for the First Time
1 Insert the batteries.
Push the battery cover on the rear of the remote control with your
thumb and remove it.
Result
: The clock starts.
2 Using a small pointed tool (
ball-point pen for example
), press the button.
Result
: The AM indication flashes.
3 To set the current time, press the or buttons under the cover on
the remote control.
To... Then...
Increase the time in one-minute intervals Press the ()button.
Increase the time in ten-minute intervals Hold down the ()button.
Decrease the time in one-minute intervals Press the ()button.
Decrease the time in ten-minute intervals Hold down the ()button.
Result
: AM or PM is displayed to indicate whether the setting
corresponds to a time before or after midday.
4 When you are satisfied with your setting, confirm the time. To do so:
using a small pointed tool (ball-point pen for example), press the button.
Result
: The AM or PM indication stops flashing.
The clock starts.
Resetting the T
ime
If you have already set the time but wish to change it,
proceed as follow.
1 Using a small pointed tool (ball-point pen for example), press the button
under the remote control flap.
Result
: The AM or PM indication flashes.
2 Set the time, following the instructions in Step 3 in the procedure above.
3 When you are satisfied with your setting, confirm the time. To do so,
press the button, using a small pointed tool (ball-point pen for
example).
Result
: The AM or PM indication stops flashing.
The clock starts.
E-
8