Filter
Top Products
Temperature and Humidity Ranges
The following table indicates the temperature and humidity ranges within which the air conditioner can be used.
If the air conditioner is used at... Then...
High temperatures
The automatic protection feature may be triggered and the air conditioner stopped.
Mode Outdoor Temperature Indoor Temperature Indoor Humidity
Heating -15°C to 24°C approx. 27°C or less -
Cooling -5°C to 43°C approx. 21°C to 32°C approx. 80% or less
Drying 5°C to 43°C approx. 18°C to 32°C approx. -
❇ The standardized temperature for heating is 7°C. If the outdoor temperature drops to 0°C or below,
the heating capacity can be reduced depending on the temperature condition.
If the cooling operation is used at over 32°C(indoor temperature) then, it does not cool at its full capacity.
Low temperatures
A water leak or some other malfunction may occur if the heat exchanger freezes.
High humidity levels
Water may condense on and drip from the surface of the indoor unit if it is used for long periods.
E-24
Operating Your Air Conditioner Without the Remote Control
Your air conditioner can be operated directly from the indoor unit if
the remote control is lost or broken.
1 Slide the lower front grille down.
2 To switch the air conditioner on, press the On/Off switch on the right
side of the indoor unit.
Result
: ◆
The Operation indicator on the indoor unit comes on.
◆ The indoor unit beeps.
◆ The air conditioner starts up in the most suitable mode for
the room temperature:
Room Temperature Operating Mode
Less than 21°C Heat
21°C or above Cool
3 To switch the air conditioner off, press the On/Off switch again.
NN
NN
oo
oo
tt
tt
ee
ee
Even if the air conditioner has been switched on via the
On/Off switch, operations can still be controlled using the
remote control as usual.
MH020FPEA IB_E_20234 3/9/07 20:44 Page 24