Filter
Top Products
E-16
Setting up the Drain Hose Connector
The Drain hose connector can be used to drain the water externally, instead of
using the water bucket.
1
Hold the holes on both sides of the water bucket and slide it out.
2
Remove the Drain Connector Hole cover located in the back of the unit.
3
Slide the Drain Hose Connector through the Drain Connector Hole, and
connect it to the Drain Hole.
4 Connect the Drain Hose to the Drain Hose Connector.
: The Drain hose sold separately at participating retail stores.
(An optional drain hose is available for purchase through Retail stores.)
5
Slide the water bucket back into place.
: If the water bucket is incorrectly inserted, the Bucket Full light will come on
and the product will not operate.
Drain Hose
Connector
Drain Connector Hole
Drain Hole
Drain Hose Connector
Drain Hose
³ýʪ»ú-E.indd 16 2007-10-18 10:11:44