Filter
Top Products
E-7
If you orient the air flow blades downwards and the unit operates
in Cool mode for long periods of time, dew may:
Form on the surface of the blades
Drip from the blades
Adjusting the Air Flow Direction Horizontally
Adjusting the Air F
low Direction Vertically
HSILGNE
Depending on the position of the unit in your room, you can adjust the
orientation of the inner air flow blades on the right-hand side of the
unit, thus increasing the efficiency of the air conditioner.
1 Set the air flow blade swing switch to the on position.
Resul
t:
The inner blades swing automatically left and right.
2 To stop the blades moving left and right, set the air flow blade swing
switch to the off position.
To stop the blades in a specific position and orient the air flow in
the corresponding direction, simply set the switch to the off
position when the blades are in the desired position.
Again depending on the position of the unit in
your room, you can adjust the
orientation of the outer air flow blades on the right-hand side of the unit.
RECOMME
NDATION When... Adjust the blades to face...
Cooling U
p
wards.
Adjust the air f
low blades to the desired position, by pushing them
upwards or downwards.
Temperature and Humidity Ranges
The following table indicates the temperature and humidity ranges
within which the air conditioner can be used.
Mo
de Indoor Temperature OutdoorTemperature Indoor Humidity
If the air conditioner is used at.
.. Then...
Higher temp
erature
Lower temperature
Higher humidity
levels
The automatic protection
feature may be triggered
and the air conditioner stopped.
A water leakage or some other malfunction may happen
if the heat
exchanger freezes.
Water may condense on and drip from the surface of the unit
if it is used for long periods.
Cooling 21 C to 32 C app
rox. 21 C to 43 C approx. 80% or less