Filter
Top Products
Solving Common Problems
E-17
ENGLISH
Before contacting the after-sales service, perform the following simple checks. They may save
you the time and expense of an unnecessary service call.
The air conditioner does not
operate at all
◆ Check that the circuit breaker used for the air conditioner has not
been triggered.
◆ Check that the power cable is plugged into a wall socket and the
socket is switched on, if necessary.
◆
Check that the operating mode indicator (COOL or FAN) on the unit is
lit up; if necessary press (On/Off) on the remote control or unit.
Problem Explanation/Solution
The air conditioner does not
operate with the remote control
◆ Check that there are no obstacles between you and the unit.
◆ Replace the remote control batteries if necessary.
◆
Check that you are close enough to the unit (seven metres/yards
or less).
No beep is heard when you press
(On/Off) on the remote control
◆ Check that you are pointing the remote control at the remote
control sensor on the unit.
◆
Replace the remote control batteries if necessary.
The air conditioner does not cool ◆ Check that the correct operating mode has been selected COOL.
◆
The room temperature may be too low.
◆
Dust may be blocking the air filter; refer to page 15 or 16 for
cleaning instructions.
◆
Check that there is no obstacle blocking the air flow into or out of
the unit.
The air flow direction does not
change when you press the
(or on the unit)button
◆ Check that the air conditioner has been switched on; if necessary,
press (On/Off) on the remote control or unit.
The timer is not correctly triggered ◆ Check that the timer has been programmed correctly;
see page 11~13.
Odours are permeated in the
room during air conditioning
◆ Air the room.