Samsung AWT20F1MB Air Conditioner User Manual


 
E-11
Solving Common Problems
EXPLANATION / SOLUTION
Check that the circuit breaker used for the air conditioner
has not been triggered.
Check that the power cable is plugged into a wall socket and the
socket is switched on, if necessary.
Check that the correct operating mode has been selected
(cooling or airing).
Check that the correct operating mode has been selected.
The room temperature may be too low.
Dust may be blocking the air filter;
refer to page 10 for cleaning instructions.
Check that there is no obstacle blocking the air flow into or out of the unit.
PROBLEM
The air conditioner does not
operate at all
The air conditioner does not
cool
Check that the air conditioner has been switched on;
if necessary, turn the operating mode selection dial.
The air flow direction does not
change when you set the air flow
blade swing switch to the ON
position
Air the room.
Odours are permeated in the
room during air conditioning
Before contacting the after-sales service, perform the following simple checks.
They may save you the time and expense of an unnecessary call.
Technical Specifications
Model
Power Supply
AWT24F1ME
AWT24F1MEB/EC
AWT18F1ME
AWT18F1MEA/EB/EC
AWT19F1MEA
220-240V~, 50Hz
AWT24F1MB
AWT24F1MBA/BC
AWT20F1MB
AWT20F1MBA
AWT18F1MBB/BC
220V~, 60Hz
Design and specifications are subject to change without notice.